NEMA42 Stepper Motor 110Kg-Cm Torque w/t Leadshine D860H | MA860H(RMCS-4403)

Ideal Motor for CNC machines and other machinery. Standard NEMA42 frame size. 110Kgcm bipolar configuration motor with LEADSHINE D860H | MA860H STEPPER DRIVER 7.2A. Ideal performance at 5Amp configuration.

The D860H | MA860H is a high performance Leadshine original microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives on the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Features

  • Step Angle : 1.8 Degree
  • Configuration: 4 wire bipolar stepper motor
  • Holding Torque: 110kgcm bipolar mode
  • Phase current : 5.5Amp
  • Resistance/phase: 0.7ohm
  • Inductance/Phase : 9.85mH
  • Rotor inertia: 5500 gcm2
  • Length (L): 99mm
  • Shaft Dia : 19mm
  • Shaft Length : 55.37mm
  • Weight: 5000 grams

Leadshine Drive Specifications:

  • Leadshine original D860H | MA860H microstepping drive
  • Input voltage Up to +80VAC or +110VDC
  • Output current Up to 7.2A
  • Pulse input frequency up to 300 KHz
  • Suitable for 2-phase and 4-phase motors
  • Automatic idle-current reduction
  • Over-voltage, over-current protection
  • Support PUL/DIR and CW/CCW modes  
  • Operating Temperature : 70 C

Power and Motor Terminal Assignments

Pulse and Direction Inputs

Comments are closed.