CNC ROUTER 300X400MM ASSEMBLED – 10KGCM SERVO & CNC CONTROLLER (RMCS-3501)

A fully assembled and configured small table top 3 Axis CNC Router which can cut, engrave or drill materials like Plastics, PCBs, Carbon Fibre and light metals like copper and brass. It can also engrave metals like MS, silver or Aluminum. Working area of the machine is 280x380x65mm(X,Y,Z). It comes with a 800W AC spindle with ER11 collet and can go upto 24000rpm. This model comes with 10Kg.Cm Hybrid Servo motors which give high rapid speeds upto 2500rpm.

Lightweight Aluminum design with 12mm ball screws gives high precision movements. The machine is fitted with our Hybrid Step-Servo Motors which provide closed loop control, high accelerations and speeds. All together it gives an accuracy of 0.05mm with repeatability of 0.02mm and speeds up to 10000mm/min. If used for drilling i.e. PCB drilling it can drill up to 120 holes per minute. Overall it gives a complete solution for desktop routing, engraving and milling for light materials.

The machine comes with 3 Axis Standalone CNC controller and plastic housing for CNC controllers and motor drives. For the convenience of shipping and packaging the machine is divided in to 3 boxes, assembly and connections take 10 minutes to make a full working machine.

Specifications:

1.   Machine Dimensions: 610×485×395mm
2.   Construction material:6061 and 6063 hard aluminum alloy special extrusions
3.   Engraving Area:380×280mm
4.   Z-axis Stroke: 65mm, Engraving depth depends on the length of the tool edge
5.   Maximum job height: <=70mm
6.   Rail type: Chrome plate shaft+Linear Bearings(Surface hardening 61HRC)
7.   Transmission unit: SFU1204 ball screw
8.   Repeat positioning Accuracy: 0.05mm
9.   Machine weight: 16kg(including packaging)
10.  Main application: Engraving & Cutting for Wood,bamboo,PCB,PVC,PMMA,plastics,ABS etc. It can also engrave on gold, silver, copper, aluminum, Pb, etc. It’s not for metal milling, it may damage the ball screw or spindle.

This Package Includes:

1 X 3 Axis Standalone CNC Controller with spindle and MPG Support
3 X Hybrid Servo Motor 2-Phase 10kg-cm with Servo 80V 7Amp Drive
1 X 48V 5.2A Industrial Power Supply
1 x 24V 1.1A Industrial Power Supply
6 x Magnetic end stops Limit switch
2 X Cable Drag Chain Wire Carrier with end connectors 10x20mm 1Meter
3 X Nema23 Stepper and Hybrid Servo Motor Mount

This machine is also available in different packages. Please check the comparison table below.

Model	Working Area	Type	Motors, Drives & Motor Mounts	Spindle	Controller	Power Supply	Cable Carriers	Wires, Cables & Connectors	Controller & Drives Cabinet	Magnetic End stops	Price Rs.
RMCS-3501	280x380mm	Assembled and configured	10Kg.Cm Hybrid Servo	0.8KW 220V AC & VFD	DDCSV1.1 Standalone	Included	Included	Included	Included, Assembled & Connected	Included, installed	1,59,200/-
RMCS-3502	280x380mm	Assembled and configured	22Kg.Cm Hybrid Servo	0.8KW 220V AC & VFD	DDCSV1.1 Standalone	Included	Included	Included	Included, Assembled & Connected	Included, installed	1,65,200/-
RMCS-3503	280x380mm	Assembled frame only. Rest DIY Kit	10Kg.Cm Hybrid Servo	0.8KW 220V AC & VFD	DDCSV1.1 Standalone	Included	Included	Included	None	Included, assembly required	1,18,000/-
RMCS-3504	280x380mm	Assembled frame only. Rest DIY Kit	22Kg.Cm Hybrid Servo	0.8KW 220V AC & VFD	DDCSV1.1 Standalone	Included	Included	Included	None	Included, assembly required	1,28,000/-
RMCS-3505	280x380mm	Assembled frame only. Rest DIY Kit	19Kg.Cm Stepper Motors	0.8KW 220V AC & VFD	DDCSV1.1 Standalone	Included	Included	Included	None	Included, assembly required	1,12,600/-
RMCS-3506	280x380mm	Assembled frame only. Rest DIY Kit	10Kg.Cm Hybrid Servo	0.8KW 220V AC & VFD	None	Included	None	None	None	Included, assembly required	94,500/-
RMCS-3507	280x380mm	Assembled frame only. Rest DIY Kit	22Kg.Cm Hybrid Servo	0.8KW 220V AC & VFD	None	Included	None	None	None	Included, assembly required	1,04,500/-
RMCS-3508	280x380mm	Assembled frame only. Rest DIY Kit	19Kg.Cm Stepper Motors	0.8KW 220V AC & VFD	None	Included	None	None	None	Included, assembly required	89,100/
RMCS-3509	280x380mm	Assembled frame only	None	None	None	None	None	None	None	None	49,650/-
RMCS-3510	390x590mm	Assembled and configured	22Kg.Cm Hybrid Servo	1.5KW 220V AC & VFD	DDCSV1.1 Standalone	Included	Included	Included	Included, Assembled & Connected	Included, installed	2,10,000/-
RMCS-3511	390x590mm	Assembled frame only. Rest DIY Kit	22Kg.Cm Hybrid Servo	1.5KW 220V AC & VFD	DDCSV1.1 Standalone	Included	Included	Included	Included, assembly required	Included, assembly required	1,54,600/-
RMCS-3512	390x590mm	Assembled frame only. Rest DIY Kit	19Kg.Cm Stepper Motor	1.5KW 220V AC & VFD	DDCSV1.1 Standalone	Included	Included	Included	Included, assembly required	Included, assembly required	1,35,500/-
RMCS-3513	390x590mm	Assembled frame only. Rest DIY Kit	22Kg.Cm Hybrid Servo	1.5KW 220V AC & VFD	None	Included	Included	Included	None	Included, assembly required	1,35,100/-
RMCS-3514	390x590mm	Assembled frame only. Rest DIY Kit	19Kg.Cm Stepper Motor	1.5KW 220V AC & VFD	None	Included	Included	Included	None	Included, assembly required	1,16,000/-
RMCS-3515	390x590mm	Assembled frame only	None	None	None	None	None	None	None	None	74,500/-