A fully assembled and configured small table top 3 Axis CNC Router which can cut, engrave or drill materials like Plastics, PCBs, Carbon Fibre and light metals like copper and brass. It can also engrave metals like MS, silver or Aluminum. The working area of the machine is 280x380x65mm(X, Y, Z). It comes with an 800W AC spindle with ER11 collet and can go upto 24000rpm. This model comes with 22Kg.Cm Hybrid Servo motors which give high rapid speeds upto 2500rpm.
A lightweight Aluminum design with 12mm ball screws give high precision movements. The machine is fitted with our Hybrid Step-Servo Motors which provide closed loop control, high accelerations and speeds. All together it gives an accuracy of 0.05mm with repeatability of 0.02mm and speeds upto 10000mm/min. If used for drilling i.e. PCB drilling it can drill upto 120 holes per minute. Overall it gives a complete solution for desktop routing, engraving and milling for light materials.
The machine comes with 3 Axis Standalone CNC controllers and plastic housing for CNC controllers and motor drives. For the convenience of shipping and packaging the machine is divided in to 3 boxes, assembly and connections take 10 minutes to make a full working machine.
This Package Includes:
- 1 X 3 Axis Standalone CNC Controller with spindle and MPG Support
- 3 X Hybrid Servo Motor 2-Phase 22kg-cm with Servo 80V 7Amp Drive
- 1 X 48V 5.2A Industrial Power Supply
- 1 x 24V 1.1A Industrial Power Supply
- 6 x Magnetic end stops Limit switch
- 2 X Cable Drag Chain Wire Carrier with end connectors 10x20mm 1Meter
- 3 X Nema23 Stepper and Hybrid Servo Motor Mount
Specifications:
1. Machine Dimensions: 610×485×395mm
2. Construction material:6061 and 6063 hard aluminum alloy special extrusions
3. Engraving Area:380×280mm
4. Z-axis Stroke:65mm, Engraving depth depends on the length of the tool edge
5. Maximum job height: <=70mm
6. Rail type: Chrome plate shaft+Linear Bearings(Surface hardening 61HRC)
7. Transmission unit: SFU1204 ball screw
8. Repeat positioning Accuracy: 0.05mm
9. Machine weight: 25kg-30kg (including packaging)
10. Main application: Engraving & Cutting for Wood,bamboo,PCB,PVC,PMMA,plastics,ABS etc. It can also engrave on gold,silver,copper,aluminium,Pb etc.
Its not for metal milling, it may damage ball screw or spindle.
This machine is also available in different packages. Please check the comparison table below.
| Model | Working Area | Type | Motors, Drives & Motor Mounts | Spindle | Controller | Power Supply | Cable Carriers | Wires, Cables & Connectors | Controller & Drives Cabinet | Magnetic End stops | Price Rs. |
| RMCS-3501 | 280x380mm | Assembled and configured | 10Kg.Cm Hybrid Servo |
0.8KW 220V AC & VFD |
DDCSV1.1 Standalone | Included | Included | Included | Included, Assembled & Connected | Included, installed | 1,59,200/- |
| RMCS-3502 | 280x380mm | Assembled and configured | 22Kg.Cm Hybrid Servo |
0.8KW 220V AC & VFD |
DDCSV1.1 Standalone | Included | Included | Included | Included, Assembled & Connected | Included, installed | 1,65,200/- |
| RMCS-3503 | 280x380mm | Assembled frame only. Rest DIY Kit | 10Kg.Cm Hybrid Servo |
0.8KW 220V AC & VFD |
DDCSV1.1 Standalone | Included | Included | Included | None | Included, assembly required | 1,18,000/- |
| RMCS-3504 | 280x380mm | Assembled frame only. Rest DIY Kit | 22Kg.Cm Hybrid Servo |
0.8KW 220V AC & VFD |
DDCSV1.1 Standalone | Included | Included | Included | None | Included, assembly required | 1,28,000/- |
| RMCS-3505 | 280x380mm | Assembled frame only. Rest DIY Kit | 19Kg.Cm Stepper Motors |
0.8KW 220V AC & VFD |
DDCSV1.1 Standalone | Included | Included | Included | None | Included, assembly required | 1,12,600/- |
| RMCS-3506 | 280x380mm | Assembled frame only. Rest DIY Kit | 10Kg.Cm Hybrid Servo |
0.8KW 220V AC & VFD |
None | Included | None | None | None | Included, assembly required | 94,500/- |
| RMCS-3507 | 280x380mm | Assembled frame only. Rest DIY Kit | 22Kg.Cm Hybrid Servo |
0.8KW 220V AC & VFD |
None | Included | None | None | None | Included, assembly required | 1,04,500/- |
| RMCS-3508 | 280x380mm | Assembled frame only. Rest DIY Kit | 19Kg.Cm Stepper Motors |
0.8KW 220V AC & VFD |
None | Included | None | None | None | Included, assembly required | 89,100/ |
| RMCS-3509 | 280x380mm | Assembled frame only | None | None | None | None | None | None | None | None | 49,650/- |
| RMCS-3510 | 390x590mm | Assembled and configured | 22Kg.Cm Hybrid Servo | 1.5KW 220V AC & VFD | DDCSV1.1 Standalone | Included | Included | Included | Included, Assembled & Connected | Included, installed | 2,10,000/- |
| RMCS-3511 | 390x590mm | Assembled frame only. Rest DIY Kit | 22Kg.Cm Hybrid Servo | 1.5KW 220V AC & VFD | DDCSV1.1 Standalone | Included | Included | Included | Included, assembly required | Included, assembly required | 1,54,600/- |
| RMCS-3512 | 390x590mm | Assembled frame only. Rest DIY Kit | 19Kg.Cm Stepper Motor | 1.5KW 220V AC & VFD | DDCSV1.1 Standalone | Included | Included | Included | Included, assembly required | Included, assembly required | 1,35,500/- |
| RMCS-3513 | 390x590mm | Assembled frame only. Rest DIY Kit | 22Kg.Cm Hybrid Servo | 1.5KW 220V AC & VFD | None | Included | Included | Included | None | Included, assembly required | 1,35,100/- |
| RMCS-3514 | 390x590mm | Assembled frame only. Rest DIY Kit | 19Kg.Cm Stepper Motor | 1.5KW 220V AC & VFD | None | Included | Included | Included | None | Included, assembly required | 1,16,000/- |
| RMCS-3515 | 390x590mm | Assembled frame only | None | None | None | None | None | None | None | None | 74,500/- |