The rated speed of the product is 3000RPM and the minimum speed is 1RPM. It has the characteristics of low running noise, stable operation and low noise.
The 2500 line encoder is especially suitable for applications requiring high speed and low noise.
RMCS-1060 is Low-voltage AC servo motor drive available with FOC field orientation vector control and supports position / speed closed loop. It supports Modbus(RS 485) control mode. And it’s easy to controlled directly from PC with PC test software. AC drive also provides Under voltage, Over voltage, Blocked, Overheat protection.
Features:
- A 32 -bit high speed DSP chip is used.
- FOC field orientation vector control, support position / speed closed loop.
- Support command pulse + direction or quadrature pulse signal.
- The speed mode supports PWM duty cycle speed regulation or voltage speed regulation.
- 16 -bit electronic gear function, 1~65535 / 1~65535 .
- The supply voltage is +20V~50V . Support 50~500W AC servo motor.
- Support serial port ( Modbus protocol RTU mode) control mode. Serial port ( TTL level) control mode, which can set the drive address and simplify the control system. It can also be controlled directly from a PC and provides PC test software.
- With under voltage, over voltage, blocked, and overheat protection.
- Provides the in-position signal, alarm output signal, and encoder zero signal of the isolated output.
Motor Specifications:
- Voltage (V): 36VDC
- Speed (Rpm): 3000 Rpm
- Frequency: 50/60Hz
- Rated Current (A): 7.5A
- No -Load current : 0.6A
- Rated Power: 200W
- Rated Torque: 0.63 N.m
- Number Of Poles: 8
- Motor length without shaft: 110mm
- Shaft length: 25mm
- Shaft Dia: 14mm
Drive General Specifications:
- Supply Voltage (V): +20V-50V
- Support: 50-500W Ac servo motor
- Support Modbus: RS 485
- Rated Current (A): 7.5A
- 16-bit electronic gear function, 1-45535 / 1-65535
- PWM duty cycle signal or 4-20ma current 3 or 0.6-3V Voltage signal control
- Support 485 (Modbus protocol RTU mode) control mode. The drive address can be set to simplify the control system. It can also be controlled directly via a PC and provides PC test software.
- With under pressure, over pressure, blocked rotation, overheat protection.
- Provide the in-position signal, alarm output signal, and encoder zero signal of the isolated output.
Power and Motor Terminal Assignments:
| Terminal No. | Terminal Name | Wire Color |
| Terminal 1 | Vcc | Supply voltage +20V~50V. |
| Terminal 2 | GND | Ground |
| Terminal 3 | W | Yellow |
| Terminal 4 | V | Red |
| Terminal 5 | U | Blue |
Pulse and Direction Inputs:
| Terminal No. | Terminal Name | Wire Color |
| Terminal 1 | ENA- | Enable -ve input |
| Terminal 2 | ENA+ | Enable +ve input |
| Terminal 3 | DIR- | Direction -ve input |
| Terminal 4 | DIR+ | Direction +ve input |
| Terminal 5 | PUL- | Pulse -ve input |
| Terminal 5 | PUL+ | Pulse +ve input |
RS 485 Pins:
| Terminal No. | Terminal Name | Description |
| Terminal 1 | GND | signal ground |
| Terminal 2 | 485A | 485 communication A end (D+ end) |
| Terminal 3 | 485B | driver serial port receiver (TTL level) |
| Terminal 4 | +5V | external supply 5V maximum 100mA |
| Terminal 5 | V-IN | speed control voltage or current signal input |
| Terminal 6 | COM | output signal common |
| Terminal 7 | WR | alarm signal output. Low level when alarming |
| Terminal 8 | PF | in-position signal output. Low when in place |
| Terminal 9 | ZO | encoder zero signal output. Low to zero |
| Terminal 10 | NC | – |
Package Includes:
- 1 x NEMA24 LOW VOLTAGE AC SERVO MOTOR 200W WITH RMCS-1112 DRIVER
